How to Fix a Jammed Brother Sewing Machine The Best Way

In sewing, there are many times that a needle will get stuck in the fabric. This is usually due to a loose thread on the underside of your work surface or a different color thread catching and getting caught up with other threads.

Sewing machines have been known to jam when this happens because it can be hard for them to differentiate between what’s inside and what’s outside.

To fix this problem, you need to remove the needle from the machine while checking for any loose threads or colors underneath your work surface, then running it through again until all stitches are clear.

If you find any knots or loops in either of these places, carefully cut them away with scissors before continuing (if necessary) with your sewing project.

How do you unjam a Brother sewing machine?

  1. Stop the machine from running
  2. Turn off your sewing machine
  3. Remove the needle from the sewing machine.
  4. Unthread the needle and remove it completely
  5. Then you should remove the presser foot together with the presser foot holder.
  6. Slightly lift your work surface at an angle, then check for loops or knots beneath the fabric with a flashlight.
  7. Make sure to look in every direction so you won’t miss anything! Using sharp scissors, snip away any loops or knots in the fabric, then run the sewing machine needle through until you don’t find any more of these.
  8. Then remove the bobbin case. Check if there are threads that remain in the bobbin case and remove them.
  9. Remove any loose threads and dust from the race using a vacuum cleaner or a lint brush.
  10. Raise the feed dogs by turning the handwheel.
  11. Insert the needle into the center of the balance wheel.
  12. Put it back into place and reinsert the bobbin case.
  13. Replace the presser foot and tighten it back into place securely.
  14. Thread your needle back into the sewing machine and stitch away!

Why Does My Brother sewing machine keep getting jammed?

Brother sewing machines can often become jammed if your work surface isn’t lined up properly. It’s important to ensure that the plain end of the needle is always in front and below threads when you’re sewing.

This ensures that the machine will be able to catch it and pull it through without any trouble. You’ll also want to make sure that any loops or knots under your fabric are pulled out before continuing.

What causes a sewing machine to lock up?

This is more common on sewing machines with a needle lock than on machines without it. The more common cause of this is due to a loose thread somewhere in the interior of your work area, or a different color catching and getting caught up with other threads.

Sewing machines have been known to lock when this happens because it can be hard for them to differentiate between what’s in and what’s out.

To fix this problem, you need to remove the needle from the machine while checking for any loose threads or colors in your work area.

If you find any knots or loops in either of these places, carefully cut them away with scissors before continuing (if necessary) with your sewing project.

Leave a Comment