How To Fix Timing On Singer Sewing Machine: 3 Steps

Last Updated on 2 months by Susan Mayrich

It’s easy to learn how to fix timing on Singer sewing machine because it’s only three steps. This article will mention tips on adjusting the timing on a Singer sewing machine, starting from the needle bar height and testing the sewing machine. You will also know what leads to these issues.

how to fix timing on singer sewing machine

Since you own a Singer model, here is a tutorial on how to thread a Singer sewing machine. Feel free to check that to know tips when preparing and setting up your machine from this brand. 


How Do I Fix The Timing On My Singer Sewing Machine At Home?


Step 1. Adjust the needle bar height

  • Read and study the manual of the specific Singer sewing machine you have
  • Remember the recommended needle bar height for your machine or find the indicator mark for it
  • Loosen the needle bar and adjust its height to align with the height indicator
  • If there is no marking, adjust the needle height until its eye is 3/32 of an inch below the hook

Step 2. Set and check the hook timing

  • Turn the handwheel and lower the needle bar to the lowest level
  • Loosen the gears of the sewing machine to allow you to adjust the distance between the needle and hook
  • The gears are usually at the base of the sewing machine, but refer to your manual to know the method for setting its hook timing
  • Check the distance that your Singer model wants for its hook and needle
  • Test if the hook catches the thread when you turn the handwheel

Step 3. Check the sewing machine

  • Inspect the entire sewing machine and tighten everything that needs it
  • Use this as an opportunity to clean and oil the sewing machine for maintenance; here is how to oil a sewing machine correctly
  • Check for any debris, grease, or lint and remove them 
  • Re-attach and install every part you removed
  • Sew on scrap fabric to check if you successfully fixed the timing on the Singer sewing machine

How To Adjust The Timing On A Singer Sewing Machine

  1. Refer to the manual of the specific sewing machine model you have or use the manual finder from Singer if you can’t find yours
  2. Loosen the screw on the needle bar lever and adjust its height so that the upper timing indicator mark is flush with the needle bar bushing’s bottom if the needle bar itself is at the lowest position
  3. Remove the base cover, needle bar cover plate, stitch plate, and bobbin on your Singer sewing machine
  4. Check the position of the needle
  5. Loosen the screws of the bobbin mechanism pulley and place the sewing machine on its back
  6. Hold the pulley to keep it in place and turn the hook until it’s pointing to the back of the sewing machine
  7. Adjust the wheel, so the needle is at the lowest level or the lower timing indicator mark is at level with the top of the needle bar
  8. The lower timing indicator mark should be flush with the bushing, and the hook is level with the needle
  9. Tighten the screws and test by moving the wheel so that the timing mark is flush with the bushing and the hook is opposite the needle
  10. Reinstall everything in place
  11. Learn how to thread a Singer sewing machine to test if the timing is accurate for what you want to do

How Do I Know If My Timing Is Off On My Sewing Machine?

  • Remove the switchplate, base cover, and bobbin case
  • Turn the wheel to see if the hook catches the thread slowly; if not, adjust the timing on your sewing machine
  • The hook shouldn’t be passing above or underneath the eye, so make sure always to monitor the hook’s tip when it rotates

What Causes Sewing Machine Timing Problems?

Both the hook and needle can cause sewing machine timing issues. The hook’s rotation should be in the proper direction, and the needle itself must be moved on the correct side. For example, the needle must move to the right for a hook turning clockwise and left if the hook is turning counterclockwise. 

How Much Does It Cost To Fix The Timing On A Sewing Machine?

You can fix the timing on your sewing machine for free if you can detect the problem. However, getting the machine serviced will depend on the repair center. It can range from $50 or higher, depending on the machine you have. 


Why Isn’t My Singer Sewing Machine Working?

If your Singer sewing machine is not working or you notice that your stitches are skipping the fabric, you need to check your needle. Learn how to change a sewing machine needle correctly to avoid issues. Remember to push the new needle the highest you can onto the clamp and that it’s oriented where the flat part faces the back of the machine. 


Was this article helpful? To recap how to fix timing on Singer sewing machine, you must adjust the needle bar height, set the hook timing, and test the machine. It would be best also to consult the manual of the specific Singer model you have. 

If you have any more questions regarding this issue, feel free to leave us a comment. 

0 thoughts on “How To Fix Timing On Singer Sewing Machine: 3 Steps”

  1. Hi I have a singer scarlet and the timer is of I have tried all that you said but the machine is not working. Please help me. Thank you.


Leave a Comment

error: Alert: Content selection is disabled!!