How to Get Flarp Out of Carpet

Flarp is a putty-like toy that makes a farting sound when you play with it. One of the big problems with Flarp is that it tends to get stuck on clothes and carpets. Once Flarp gets stuck on the carpet, it can be very difficult to remove. This is because the putty sticks tightly and the odor can linger for quite a while.

Getting Flarp out of carpet is not as tough as it may seem. But that doesn’t mean it’s easy either. It takes a bit of time and patience, but the end result will be worth it.

How to Get Flarp Out of Carpet

What is Flarp?

Flarp commonly known as silly putty is a toy that makes loud noises when you squeeze it and it is meant to develop a child’s creativity. This toy can get sticky when it comes in contact with other materials. As such, it can leave a stain and can also be difficult to remove.

How to Get Flarp Out of Carpet

How to Get Flarp Out of Carpet

Freezing Method

  1. Place the ice cube directly on top of the Flarp. 
  2. Leave it until the Flarp hardens from being frozen. 
  3. Scrape off the flarp when hard enough with a butter knife, spoon, or another scraping tool. 
  4. If there’s any leftover that’s still soft, try using some tweezers to scrape it off. Make sure not to push down too hard into the carpeting or you might end up with a permanent mark. 
  5. Vacuum up any remaining particles of Flarp with a vacuum cleaner.

Getting Flarp Out of Carpet With Vinegar 

If you can not use the ice cube method, using vinegar is another great way for removing these sticky substances.

  1. Use a spoon or knife to remove as much of the flarp as possible. 
  2. Pour some vinegar on the stain. Flaten the carpet fibers with your fingers while doing this so that the vinegar can reach through to the bottom of the stain. 
  3. Then blot with a clean paper towel or cloth. 
  4. Let it stand for several minutes.  
  5. Rinse with plain water and blot dry. The remaining trace of the vinegar smell will evaporate quickly as the carpet dries completely.

Use Rubbing Alcohol

Rubbing alcohol is one of the best things you can use to clean Flarp stains out of the carpet. And it comes in a variety of concentrations, so pick up some that’s right for you.

Wear a mask and gloves while applying the solution. You can’t trust that you won’t accidentally get some of the solution on your hands.

  1. Soak cotton balls in rubbing alcohol, then blot the affected area with them.
  2. Work gently when blotting to avoid over-pressurizing the spot or pulling at carpet fibers.
  3. Apply gentle pressure by repeatedly blotting the affected area with fresh cotton balls until you’ve removed all traces of the stain.
  4. Once all of the Flarp is gone, vacuum up any remaining strands and let your carpet dry completely.

Use Baking Soda

Most people know that baking soda is an effective deodorizer, but few realize that it can also be used to sticky substances from carpets and other household items. Baking soda is a much better choice for removing stains from carpets because it’s a natural product that doesn’t leave any residue.

It’s easiest to use baking soda by mixing 1 part baking soda with 2 parts warm water and then using the solution as directed in the instructions below.

  1. To make the paste, mix a tablespoon of baking soda with a tablespoon of warm water.
  2. Use a soft brush to apply it onto the stain, and let it sit for 15 minutes.
  3. After that time, blot the area with a clean cloth or paper towel.
  4. If the stain remains, use another cleaning solution to scrub it off, then vacuum the carpet to pick up any additional residue.
  5. If you don’t get all of it up, apply another coat to continue removing any residual smell from the carpet.

Dishwashing soap

Another effective and simplest way to get it out is with dish soap. This method is ideal for any area of carpet that you’re having trouble getting out of. The process can take just a few minutes on average, and it works well enough to remove most types of flarp from the carpet.

Just follow these simple steps:

  1. Mix one cup of warm water with a teaspoon of dishwashing in a spray bottle. 
  2. Shake bottle, then spray dish soap and water mix onto carpet until it’s dampened. 
  3. Let’s sit for 15 minutes.
  4. While the flarp is still wet, use a dry cloth to blot up as much of it as you possibly can. 
  5. Afterward, vacuum and let the carpet dry completely before returning to its regular cleaning routine.

Removing flarp from carpet with WD-40

Flarp can be removed from the carpet by using a solvent, which is typically referred to as WD-40. However, this method should be done carefully, because it is possible to damage the carpet.

  1. Start by spraying a small amount of WD-40 on a cloth and patting the area with it. 
  2. Next, let the solvent sit for 15 minutes before rinsing it off using a wet cloth. 
  3. Finally, vacuum the area and let it dry.

Using hydrogen peroxide

Hydrogen peroxide can be used to remove a variety of stains and odors from carpets. It’s effective on pet stains and odors, as well as on dirt and other stains that come from food or drink stains.

  1. Apply hydrogen peroxide liberally to the affected area and let it sit for 15 minutes. If you are unable to do this, you can use a piece of the paper towel instead, applying hydrogen peroxide directly onto it and letting it sit for about 20 minutes before blotting.
  2. Then use a wet cloth to blot up the stain as best you can.
  3. Repeat as necessary until you have removed all traces of the stain.
  4. Vacuum up the leftover hydrogen peroxide using your vacuum with its upholstery attachment or the brush attachment on your vacuum cleaner.

Club soda

You are probably familiar with the idea of removing a stain from a carpet. But did you know you can use club soda to get flarp out of carpet?

  1. Simply pour about a capful of club soda on the stain, let it soak in for a few minutes.
  2. Then rub it gently with a dry cloth.
  3. Add another capful of club soda and let it soak for another 10 minutes.
  4. Blotting the spot until it is dry.

Leave a Comment