How To Remove An Iron On Transfer? 3 Quick Methods!

Do you want to know how to remove an iron-on transfer? This article will assist you in understanding the removal process. You can simply use a hairdryer and chemical solvent method to remove an iron on transfer. Having iron-on transfer on your shirts or any other clothing can be a great way to stand out in your styles; it is a way to add different designs and styles to your garments.

Most iron-on transfers are permanent, and removing them can be tricky and time-consuming. However, if you use the methods in this guide and follow the steps correctly, you will be able to remove iron-on transfer glue from the fabric. So without further ado, let’s get started reading this article.

how to remove an iron on transfer


Quick Summary 

To remove iron-on transfer from clothing, place the clothing on the ironing board or flat surface with the transfer facing up. Placing a piece of cotton cloth or wax paper on the transfer, heat the iron, and start ironing for about 20 seconds. Remove the residue using rubbing alcohol, wash the clothing, and let it dry naturally.


Methods To Remove An Iron Transfer

Here are the methods you can follow to remove an iron-on transfer from clothing or any type of fabric.

  • Using clothing Iron
  • Chemical Solutions or Solvents
  • Using Hairdryer Method


You will use these items to remove the iron on transfers from the fabric.

  • An iron
  • Ironing board
  • Wax paper
  • Cotton cloth
  • Washing Detergent
  • Knife
  • Washing Machine


#1. Using the chemical solvent method

We can use chemical solvents such as adhesive remover or rubbing alcohol to remove an iron-on transfer or lettering from clothing. You must have a knife. Adhesive remover, rubbing alcohol, and hairdryer to use this method.  High heat the dryer, and then place the garment you want to remove the lettering on an iron-on transfer for a few minutes to loosen the transfer. Now turn the inside of your clothing out, and the transfer should be inside, but you should be able to locate it. 

Get the adhesive or nail polish remover and test it on a small area of the shirt you want to remove the lettering or an iron-on transfer. This is done to see if this solvent will not damage the clothing. Now you should apply nail polish remover or adhesive remover around the transfer area. The solvent makes the transfer lose its strength. Stretching the clothing as you continue applying more and more chemical solvents.

Apply solvent for some time, and start peeling the transfer on the clothing. You may use a knife or any sharp equipment to remove the lettering. After removing the transfer, there should be remaining residue. Apply rubbing alcohol to remove the remaining iron-on transfer residue. Lastly, wash the clothing either by hand or using a washing machine. Remember to use good washing detergent and let it dry.


#2. Using the hairdryer method to remove an iron-on transfer

Before applying this method, arrange the cloth, hairdryer, rubbing alcohol, cotton swab, and knife.  You first need to place the cloth to remove the transfer on an ironing board or any flat surface such as a table. Get a cloth, which can be a towel, and place it inside the clothing you want to remove the iron-on transfer. The towel placed inside the garment prevents the lettering or transfer from damaging other parts of the garment when heating.

Set the hairdryer on its hottest setting, and bring it close to the lettering or the transfer to receive the heat. When you heat the transfer with the hairdryer, the lettering will be removed easily. After heating the transfer with a hairdryer, now use a sharp knife to remove the transfer slowly. Use the hairdryer again to remove the small remaining transfers and lettering. You should wait because the process takes time. Get a piece of a cotton swab and soaks it in rubbing alcohol. Start rubbing the transfer area with the rubbing alcohol to remove the residue. Wash the clothing as usual and let it dry.


#3. Remove an iron on transfer using an iron

Using a clothing iron is another method to remove and remove transfers. An iron, Wax paper, iron board, or table are required to make this method successful. Put the garment you watch to remove the iron transfer on a flat surface or ironing board. Put any cloth of your choice inside the garment. This prevents the other part of the garment from getting damaged. These instructions on the garment will help you understand if the garment can be heated up to the maximum heat setting.  It is time to heat the iron to the hottest setting to meet the transfer.

Now get a wax paper and place it over the transfer. The lettering will melt and stick to the wax paper. Now it’s time to start ironing. Place the iron over the wax paper. Continue heating until the transfer is no longer seen. Use rubbing alcohol to remove any remaining glue residue on the clothing. Wash the garment normally or with a washing machine and let it dry.


Frequently Asked Questions-(FAQs)

Here are some FAQs you must read to find out more!


Can you iron over iron on transfer?

You can iron over an iron-on transfer if the heat is low. But if the heat is so high, this can damage the iron-on transfer and the clothing.


Can you use nail polish remover on the fabric?

Yes, you can use nail polish remover on the fabric. However, you must first test with tiny drops of nail polish remover on the fabric to see if it won’t damage the clothing.


Does rubbing alcohol bleach clothes?

Rubbing alcohol contains bleaching agents and may leave stains on the clothes. You need to test the clothing with tiny drops of rubbing alcohol to see if it won,t damage.


Can you wash iron-on transfers?

Yes, you can wash iron-on transfers with a washing machine set to a delicate cycle and wash the iron-on transfer using cold water.


How do you clean an iron-on transfer shirt?

To clean an iron-on transfer shirt, put the transfer shirt in the washing machine and set the machine to the delicate cycle, then put the cold water and the mild detergent to wash and clean the iron-on transfer on the shirt. You may also be interested to know about the type of sewing machines.


It’s A Wrap!

We are happy that you have learned how to remove an iron on transfer. The above methods can help you remove iron on transfers. But remember to follow the methods well to get the best results. You can use all methods to see which works best for you. Thank you, friends, for reading this article until the end. You may also want to read about how to remove iron on patches and can you iron polyester.

Leave a Comment