How to Remove Iron on Patches Quickly and Easily

Looking for ways how to remove iron-on patches from clothes? Attaching iron-on patches on the fabric is the best way to cover holes or tears on any fabric instead of sewing. Putting an iron-on patch on your clothing can be very easy and quick, but the problem comes when the patch looks ugly, you’re tired of it, and you’re looking for ways to get rid of that patch on your pair of jeans jacket, or shirt.

You will find it difficult to remove the iron-on patches because the glue at the back is very tough, and when you do it the wrong way, you might leave the glue residue on the fabric. But it would help if you didn’t worry; here is a step-by-step guide containing tricks you can use to remove iron-on patches on any fabric easily and quickly. We have also listed some tools you will need to remove the iron-on patches successfully. There are many different patches, including woven patches and more.

How to Remove Iron on Patches

 

A-List Of Methods To Use 

Below we have listed the methods for removing iron patches:

#1. Using Iron

#2. Hair Dryer

#3. Nail Polish Remover

#4. Freezing Method

#5. Warm water

 

How To Remove Iron On Patches From Clothes?

You can use many methods to effectively remove the patches without spoiling the look of your garment. To remove the iron-on patches, you can apply the heat to patches to soften the glue, or you can also use an adhesive solvent if you can not remove the iron-on patches with the heat.

 

#1. Using iron

This is one of the best ways to remove the iron-on patches on the clothing. Just follow these steps:

Image by: Karolina Grabowska | Pexels 

#1. Turn the iron on and set it to the medium-hot setting. But the steam function should be off.

#2. Place a piece of cotton fabric or parchment paper on the ironing board or any table, whatever is available.

#3. Place the garment you want to remove on the ironing board with the fabric glue side of the patch on top of the cotton cloth.

#4. Move the iron over the patch and start ironing slowly for 28 seconds until you see that the cotton cloth adheres to the glue.

#5. The glue will disappear when you peel off the cotton fabric.

#6. Repeat the same process until the fabric glue is removed.

 

#2. Using nail polish remover

Did you know that you can do more with your acetone contained in nail polish remover? This acetone ingredient removes the polish on your nails and can wash away the iron-on patches. You may also be interested to know how to remove nail polish out of clothes.

Yes, you can remove the iron patch with the help of nail polish when you follow these simple steps

But before doing anything, first, test the nail polish remover on a piece of cloth to ensure that it won’t damage the fabric material.

#1. Get a cotton ball and deep it into the nail polish remover. Start wiping the cotton ball around the edges of the patch to make the glue lose

#2. Starting lifting and removing the iron-on patch slowly by slowly

#3. Repeat the same process until the patch comes off

#4. Remove the rest of the glue using nail polish remover

 

#3. Using the freeze method

Did you know you can remove the iron-on patches by freezing the fabric?

Yes, the method is tested and can yield excellent results at the end without leaving any glue materials. Follow these steps:

#1. You only need to get a plastic bag and put the garment there.

#2. Then put the bag inside the freezer. Depending on the patch glue type and strength, you can leave it there for 4 hours or even a whole night.

#3. Then after some reasonable time, remove the bag from the freezer, take the garment out of the plastic, and spread it flat on the table.

#4. Start to lift the patch as you remove it slowly and carefully with the help of anything like a spoon or butter knife.

#5. When the patch is finally removed, remove the remaining residua, and we are good to go.

Note: Never remove the iron-on patch using sensitive equipment such as a knife. It may end up damaging the garment.

 

#4. Using warm water

This is another excellent method to get rid of iron-on patches on your fabric. Follow these steps:

#1. All you need to do is deepen the entire garment into a bucket of warm water and cover the bucket.

#2. Make sure the iron-on patches are submerged in the water.

#3. When you see that the water has become cold, remove that water and refill the bucket with fresh warm water and cover again.

#4. Then, remove the clothing and remove the iron-on patch gently and slowly until you see that the patch is removed.

 

#5. Using hair dryer 

Maybe if you can not use other methods, a hairdryer can be of good help. Follow these steps:

#1. The first thing you need to do is to set the hairdryer on hot heat.

#2. Bring the hairdryer near the iron-on patch area on the garment.

#3. Start blowing the backside of the patch until you that the patch glue is heated in about 10 to 20 seconds.

#4. Gently start lifting and peeling the patch until it is removed

#5. You can apply adhesive remover if you have to move the remaining glue.

 

Frequently Asked Question/FAQs

Let’s answer a few questions:

 

How long do I iron an iron-on patch?

Ironing an iron-on patch will take 20 to 30 seconds to get better results.

 

Can I make my iron-on patch?

Yes, you can make your iron-on patch by placing the patch on the fabric, cover with a piece of cotton cloth, and then ironing it for 20 or 30 seconds.

 

How do you repair an iron-on patch?

No, you can not repair an iron-on patch. You must remove it using warm water, placing the fabric into the water, or using nail polish remover.

 

It’s A Wrap!

After reading this article, we hope you’ll understand how to remove iron-on patches. Those are the methods we have tested, and they worked well. Try one by one method to see which will work best depending on the quality and material of the fabric. You may also want to read about can you iron on patches to polyester and how to iron on patches without an iron.

3 thoughts on “How to Remove Iron on Patches Quickly and Easily”

Leave a Comment