Last Updated on 7 months by Susan Mayrich
If you want to remove a screen print from your hoodie, there are a few reasons you might want to do so. Maybe you don’t like the printing. Perhaps the printing is getting old and doesn’t look good anymore. Or maybe you just want to get rid of the unwanted design on your hoodie.
Whatever the reason, remove the print by following these steps below:
What is Screen Printing?
Screen printing is the most common way to transfer designs onto fabrics. It involves using a screen to create images on the surface of the fabric.
Can You Remove Print from Hoodie?
Yes, it is possible to remove a print from a hoodie. There are many ways to remove a screen print from a hoodie including a nail polish remover, using rubbing alcohol and many others.
There are many ways to remove a screen print from a hoodie including a nail polish remover, using rubbing alcohol and many others. The key thing is that you must be careful when removing the print from your hoodie.
4 Effective Ways of Removing Printing from Hoodies
Nail Polish Remover
If you’re looking to remove a print from a hoodie, the best option is nail polish remover. Nail polish remover is an effective way to remove prints without damaging the garment.
To remove a print from your hoodie, apply a small amount of nail polish remover to a clean cloth and gently rub over the mark. You can leave the fabric covered in nail polish remover for a few minutes.
Using an old toothbrush or other soft-bristled brush (not metal), carefully scrub away at any ink stains on your hoodie using lukewarm water and mild dish soap (do not use bleach), taking care not to scratch or damage any other parts of your sweatshirt while doing so.
Once all of the ink stains are gone, rinse out your hoodie under cold running water until it is completely clean.
Once it is dry, hang it up on a clothesline outside if possible; otherwise, put it in an airtight container.
It’s also one of the most common types of ink used in embroidery and other dying processes. It will help break down the ink that is on your garment. You can find this product in most grocery stores, but it is also available online. Plastisol remedies are available at most craft stores.
You’ll need to use a small amount of the remover and rub it onto the print using Let this sit for 30 minutes.
Finally, wash your hoodie in a regular washing machine cycle with a mild detergent.
If you don’t have any plastisol remover handy, you can use rubbing alcohol instead. Rubbing alcohol works well as a way to remove plastisol from garments without damaging them too much.
The good thing about rubbing alcohol is that it does not contain any solvents or other chemicals that could leave behind stains on your garment or damage your clothes in some way. You can purchase rubbing alcohol at any drugstore or pharmacy
Simply soak a cotton cloth in rubbing alcohol and apply it to the print area and leave it for 20 minutes.
Hold the hoodie and blot until all of the ink has been removed. Wash the garment as soon as possible after removing the ink in order to prevent yellowing.
Removing Printing with an Iron
You can remove a print from a hoodie with a dry towel and a hot iron.
Step 1. Put the hoodie on a flat surface.
Step 2. Place a dry towel inside the hoodie underneath the printing. This will help keep it from coming off when you iron over it.
Step 3. Put a wet cloth on top of your hoodie, just above where you are going to iron over it. This will prevent the print residue from getting over the iron.
Step 4. Place iron over the area where you want to remove the printing and let it heat up for 2-3 minutes.
Step 5. Use a knife to scrape the ink, then pry it off with your fingers. It may take several tries before you remove all of the ink from your hoodie.
If you want to remove the print from your hoodie, keep in mind that this is a pretty simple process. It doesn’t necessarily involve tons of equipment and there are no complicated techniques. You can use any of the above-mentioned ways whenever needed.