How to Remove Printed Tags from Clothes (4 Easy Ways)

Screen printing is one of the most popular methods to apply a label to clothing. Screen printing is probably the most common method used in clothing manufacturing today. 

The process involves printing text or images on a mesh cloth that has been placed over a silkscreen in ink. This ink transfers to the fabric and leaves a visible print that can then be washed off with detergent.

How to Remove Printed Tags from Clothes

The most effective way to remove printed tags from clothes is to soak a cotton ball in nail polish remover (acetone) and rub the design. The acetone will dissolve the ink and then wash away with water. You can also use a sugar scrub to scrape it away or use an iron and paper bag to melt the printed tag.

So how can you effectively remove tags from clothes? continues reading this article for best ways and tips.

What is Screen Printing?

Screen printing is a process that involves the application of ink through a mesh screen onto a substrate, usually fabric or paper. The screen can be set in a variety of ways, depending on the type of product being printed and the desired look. 

Inks are applied to the substrate by either hand or machine, and then squeegeeing or spraying water over it to remove excess ink.

Can You Remove Ink Tags from Clothing

Yes, ink tags can be removed from clothing. You can remove ink tags from clothing by using nail polish remover or sugar scrub. 

Nail polish remover will melt the glue holding the ink tag on your clothing, while sugar scrub will scrape away at it with its gritty texture. 

An iron with a wet paper bag may also do the trick, but be careful not to burn yourself while removing the ink tag from your clothing.

4 Effective Ways of Removing Printed Tags from Clothes

If you have a piece of clothing with a printed tag, you can use one of the following ways to remove it easily for good.

Acetone or Nail Polish Remover

This is the easiest method to remove printed tags from clothes. The oil in the nail polish will dissolve the plastic without damaging your clothing.

  1. Simply wash the tag with cold water first.
  2. Then apply a small amount of nail polish remover directly to the area where you want to remove a print tag.
  3. Leave it on for around 15 minutes. 
  4. Rub it off and wash the area.

Plastisol Remover

This is another popular method that’s great for removing printed tags from clothes. Just spray the tag with this remover, let it sit for a minute or two, then rinse out as usual with cool water. 

The plastisol remover should dissolve most of the ink on this type of material, but if you have any remaining marks, try scrubbing them with some sugar scrub.

Rubbing alcohol

Rubbing alcohol is one of the most common household items used to remove printed tags from clothing. It’s an effective method because it can penetrate through the fibers of the fabric, making it easy to remove the tag. 

Use a cotton ball or soft brush to apply to rub alcohol to any areas that have small fabric pieces that have been torn off by the tag. 

Remove Printing with an Iron

Put the item of clothing on a flat surface

If you are removing a long-lasting tag or label, place the item on a table or countertop that is large enough to accommodate it comfortably.

Place a dry towel inside the clothing

This will help keep the entire clothing from being stained by the ink residue from your ironing process.

Put a wet cloth on top of the printing 

This will help to avoid ink residue from sticking to the iron.

Starting ironing

Place an iron with its highest heat setting directly over the printed area for about 20 seconds to make sure it has heated up properly and is ready to go. 

Then, move it slowly across the entire printed area so that it can apply pressure evenly throughout all areas of the tag or label.

Use a knife to loosen the printing

Using a knife, gently begin removing the tag by cutting around it with small, light strokes. Use more force if needed but be careful not to rip or damage the fabric underneath. Repeat this process until all of your printed tags have been removed from your clothes.

How to Remove Rubber Print from Clothes

Removing Rubber Print From Clothes with Rubbing Alcohol

Rubbing alcohol is another good choice when removing rubber prints from clothing because it works quickly and doesn’t damage fabrics as some cleaners do. 

  1. With rubbing alcohol, simply apply enough rubbing alcohol onto the rubber print. Let it sit for 20 minutes.
  2. Blot the rubber print until all is removed.

How to Remove Tagless Labels from Clothing

Removing tagless labels from clothing with Vinegar

Vinegar is an effective way to remove tagless labels from clothes. It can be used on all types of fabric, including cotton, silk, and wool. 

To use this method, start at one corner of your garment where you want to remove ink and apply vinegar directly onto the area until all of the ink has disappeared from your clothes. Once all of the ink is removed from your clothes, wash them in cold water with detergent for best results.

Leave a Comment