How To Sew A Patch On Jeans? 2 Easy Tips & Tricks!

Last Updated on 1 month by Susan Mayrich

Just imagine you’re going somewhere only to find out that your favorite cloth or denim you’re going to put on there is a tear on them or you just want to know how to sew a patch on jeans. Sewing a patch on clothes doesn’t need or require so much knowledge about sewing.

How to Sew a Patch on Jeans

Because using a sewing machine might be a bit complicated but learning how to sew a patch on your jeans is not that hard, and there are so many ways to do it.

Sewing a patch might sound easy but also take time. You need to consider various small details when using different patches or fabric types. These methods include decorative sewing patches on jeans, sewing a patch by hand, fixing ripped jeans on the knee, sewing a hole in jeans, and sewing fabric patches on jeans.

In this step-by-step guide, you will learn tricks and tips on how to sew on a patch on jeans, whether it’s a hole, a tear, or just want to personalize your jeans.

 

Tips And Tricks To Sew A Patch On Jeans

Follow these tips and tricks to know how to sew a patch on jeans:

#1. When thick sewing fabrics like denim or leather, always use stronger needles because weak needles might break when forced to pass through layers of such types of fabrics.

#2. Cut the right length of the thread. This is because the thread might accidentally knot or catch.

#3. If the garment is not washed, you should wash it first to avoid ruining the patch or fabric.

 

#1. Sew on a patch by hand

Sewing a patch by hand is one of the best patching methods and works on most clothing..

 

Materials you need

The following materials are all you need when considering using these methods.

  • The cloth you’re to sew the patch
  • Thread – matching the color of the patch
  • Scissors
  • A ruler or tape
  • Patch
  • Scissors
  • Sewing pins
  • Iron
  • Ironing board (optional)

 

Steps to sew on a patch by hand

Steps #1. It is advisable to wash the fabric, dry it, and iron it before starting, avoiding stretching or shrinking. This may ruin the fabric or patch if not done.

Steps #2. Put the patch on the tear or hole of the fabric where you want to fix it and measure the patch but look closely at the seams and folds on the fabric.

Steps #3. With the help of pins, pin the patch to firmly stick in one place on the fabric to avoid moving while sewing

Steps #4. Start sewing after threading the needle with about 15 to 20 inches of the thread. After threading the needle, knot the end.

Steps #5. Sew by pushing the needle through the back of the fabric and the patch and from the edge about 1/8. Make sure to hold the patch on the fabric with your finger.

Steps #6. Continue sewing around the patch slowly using a straight stitch method which is the best, or any other preferred method of your choice. Don’t forget to remove the pins in which you can hold the patch in one place.

Steps #7. Once you’ve sewed the patch all around, knot the thread. If there is still an excess thread that remains, trim it.

 

#2. Using iron and patch

This method is one of the simplest and easiest ways to attach a patch using heat. The patches come with a sticky back and can be activated when they come into contact with heat. So you will have to use clothe iron. You may also be interested to know about machine will not pick up bobbin thread.

 

Materials needed

  • The fabric you want to patch
  • Patch
  • Clothe iron
  • Ironing board (optional)

 

Steps to put patch with iron

Steps  #1. Get the patch and remove the backing sheet covering the sticky patch area. Cut the patch into the required shape, or you may leave it as it is.

Steps  #2. Place the patch over the desired hole or tear you want to fit. The garment should be placed on an iron board to get better results.

Steps  #3. Then set the iron to the cotton temperature.

Steps  #4. Then get a piece of cotton and place it over the fabric where you placed the patch. This cotton will prevent the heat from damaging the patch.

Steps  #5. With the help of a clothing iron, start ironing for about 30 seconds

Steps #6. The work is done. Now check the result.

Note: You should not use the iron on a patch when placed on leather or elastic fabrics. Always place a cloth of cotton in between.

 

It’s A Wrap!

Follow all the steps mentioned above, and when the process fails, repeat practice to make it perfect. Let us hope this guide will help you with how to sew a patch on jeans and other clothes. Thank you my dear friends for being with us until the end! You may also want to read about how long do jeans take to air dry and how to shorten flared jeans without sewing.

Leave a Comment

error: Alert: Content selection is disabled!!